Stadium lights, Waterproof Large Outdoor Arena Light

XSY Lighting offers stadium lights to meet the different lighting requirements of the stadium(football, basketball, baseball, tennis, soccer) and the arena applications, keeping enough light to illuminate these places while reducing the light scattering that causes light pollution. They save up to 88% in energy consumption and last more than 60,000 hours. High-quality radiators reduce heat generation, thus reducing the load on air conditioners. Our new sport fixtures also can be used for outdoor and indoor lighting, such as cart parking lot, warehouse, park, street, loading port, airport, safe area, highway.

LED Stadium Light-SLA

Powerful LED technology designed for high light output

  • Power: 300W-450W-600W-750W-1000W-1250W-1500W
  • Voltage: AC100-277V/AC277-480V
  • Light efficacy: >130LM/W
  • Beam angle: 15°/30°
  • IP rating: IP66 & IK08

LED Stadium Light-SFA

A perfect and efficient lighting solution for any sports application.

  • Power: 300W-450W-600W-800W
  • Voltage: AC100-277V/347V/480V
  • Light efficacy: >150LM/W
  • Beam angle: 15°/30°/60°/90°
  • IP rating: IP65 & IK08

LED Stadium Light-SFB

Multi adjust angles, U bracket or 3D rotating bracket

  • Power: 500W-750W-1000W-1200W
  • Voltage: AC100-277V/480V
  • Light efficacy: >130LM/W
  • Beam angle: 15°/25°/60°/80*155°
  • IP rating: IP65 & IK08

Request a quote to know stadium lights cost.

STADIUM LIGHTING ADVANTAGES

There are many regulations for sporting field lighting. Lighting standards increase with the importance and popularity of the competition. Our best advantages have always been to meet the standards.

Visibility

Enjoy a clearer view.

Spotlight

Reduce light scattering.

Anti-vertigo

Better race atmosphere.

Heat dissipation

Cold forge technology 1060

LED Stadium Lights: Definitive guide

Why stop used metal halide lamps as stadium lights?

The Metal halide lamp is an AC power source that produces an arc discharge illuminating discharge products in a mixed vapor of mercury and a rare metal halide. Its light-emitting area is small, the light is relatively concentrated, the illumination distance is long, the penetration is strong, and the price is cheap. Therefore, in the early days, the world's stadiums, arenas, and other sports lighting companies used more metal halide lighting in their fields. Although the popularity of LED stadiums lites has increased, according to the US market survey, 45% of the stadiums in the United States still use traditional light sources. More and more fact show that traditional luminaires are no longer applicable, and the disadvantages are as follows:

  • Self-power consumption: Due to the use of an inductor ballast, the metal halide bulb lamps have high power consumption and operating current, and generates a very strong starting current at the moment of starting. At the same time, the ballast itself consumes a lot of electric energy, which causes huge electricity expenses and accumulates the aging time of the line.
  • Color rendering index: is an important parameter to measure the visual quality of light sources. The higher the color rendering index, the thing clearer when looking under the products. On the contrary, you will not see things, and the light will be confused. The metal halide lamp is RA65, which shows a low index. Under such a light source, it is easy to cause myopia and visual fatigue.
  • Ultraviolet content: Ultraviolet light is a terrible light that can cause serious damage to human eyes and skin, causing eye diseases and skin cancer. The ultraviolet content of traditional light sources is very strong. For example, the ultraviolet content of metal halide lamps accounts for 34% of the luminous flux. Long-term close-range work under high-level UV can cause considerable damage to the human body.
  • Preheating and repeating start-up capability: After the MH is activated, it takes a while for the power to be successfully applied, which typically takes 15-30 minutes. This is a waste of electricity. In the case of sudden power failure, the MH is forced to shut down and wait 5-10 minutes before starting again, otherwise, the lamps will burn out. These situations can easily have an impact on the performance of sports events.
  • Glare: This is caused by the incorrect combination of the light source itself or the light source and the luminaire. Conducting sports events under strong light can cause visual fatigue and visual errors. The metal halide products are not uniform and causes refraction of light, so the glare itself is very serious, they are point sources. It is also easy to form a focus and cause a glare of the lights.
  • Strobe: The strobe light is the "invisible killer" of the lighting environment, causing dizziness and migraine. The strobe of the MH is very serious, and the human eye will feel the flicker of lamps, which is very harmful to the human visual system.

LED athletic fixture has many benefits not found in other lighting technologies, which are no dangerous during use, but the main feature is their cost savings. The same age of the two lamps, we assume 3 years, during which the metal halide lamp needs to replace the ballast twice, numerous times the bulbs. And the LED fixture requires almost no maintenance, which has a long lifespan.

I believe that the electricity bill is what everyone cares about. Let’s take a look at the comparison 300 watt LED VS 1000 watt MH:

Electricity fee analysis LED MH
Actual power consumption 300w 1028w
power consumption per day 3600w 12336w
three years 3942000w 13507920w
electricity consumption three years 3942kWh 13507kWh
Electricity fee (single) three years $394.2 $1,350.7
Electricity fee (150 pcs) three years $59,130 $202,605
Saving electricity bill MH-LED= $143,475

Note: assuming 150 lights used for an average of 12 hours per day and electricity charges of $ 0.10 per kWh. The power of the ballast is 28w.

The use of the led fixture ( old lighting replacement), although the purchase price is more expensive, we should pay more attention to the long-term return on investment.

The Metal halide lamp is an AC power source that produces an arc discharge illuminating discharge lamp in a mixed vapor of mercury and a rare metal halide. Its light-emitting area is small, the light is relatively concentrated, the illumination distance is long, the penetration is strong, and the price is cheap. Therefore, in the early days, the world's stadiums, arenas, and other sports lighting companies used more metal halide lighting in their fields. Although the popularity of LED stadiums lites has increased, according to the US market survey, 45% of the stadiums in the United States still use traditional light sources. More and more fact show that traditional luminaires are no longer applicable, and the disadvantages are as follows:

  • Self-power consumption: Due to the use of an inductor ballast, the metal halide bulb lamp has high power consumption and high operating current, and generates a very high starting current at the moment of starting. At the same time, the ballast itself consumes a lot of electric energy, which causes huge electricity expenses and accumulates the aging time of the line.
  • Color rendering index: is an important parameter to measure the visual quality of light sources. The higher the color rendering index, the thing clearer when looking under the lamp. On the contrary, you will not see things, and the light will be confused. The metal halide lamp is RA65, which shows a low index. Under such a light source, it is easy to cause myopia and visual fatigue.
  • Ultraviolet content: Ultraviolet light is a terrible light that can cause serious damage to human eyes and skin, causing eye diseases and skin cancer. The ultraviolet content of traditional light sources is very high. For example, the ultraviolet content of metal halide lamps accounts for 34% of the luminous flux. Long-term close-range work under high-level UV can cause considerable damage to the human body.
  • Preheating and repeating start-up capability: After the metal halide lamp is activated, it takes a while for the power to be successfully applied, which typically takes 15-30 minutes. This is a waste of electricity. In the case of sudden power failure, the metal halide lamp is forced to shut down and wait 5-10 minutes before starting again, otherwise, the lamp will burn out. These situations can easily have an impact on the performance of sports events.
  • Glare: This is caused by the incorrect combination of the light source itself or the light source and the luminaire. Conducting sports events under strong light can cause visual fatigue and visual errors. The metal halide lamp is not uniform and causes refraction of light, so the glare itself is very serious, they are point sources. It is also easy to form a focus and cause a glare of the lamp.
  • Strobe: The strobe light is the "invisible killer" of the lighting environment, causing dizziness and migraine. The strobe of the MH lamp is very serious, and the human eye will feel the flicker of lamps, which is very harmful to the human visual system.

LED athletic fixture has many benefits not found in other lighting technologies, which are no dangerous during use, but the main feature is their cost savings. The same age of the two lamps, we assume 3 years, during which the metal halide lamp needs to replace the ballast twice, numerous times the bulbs. And the LED fixture requires almost no maintenance, which has a long lifespan.

I believe that the electricity bill is what everyone cares about. Let’s take a look at the comparison.

The use of the led fixture, although the purchase price is more expensive, we should pay more attention to the long-term return on investment.

How to purchase superior led stadium light from china suppliers?

You need to learn to distinguish between good and bad. The best fixtures have the following characteristics:

  1. Update lens
    In order to meet more stringent lighting requirements, it is necessary to continuously improve the quality of lighting. Our XSY has different beam angles, a wide beam angle increases light uniformity, and a narrow beam angle allows for concentrating. With a luminous efficiency of 150 lm/w, even a live broadcast on a TV can clearly capture the rapid movement of an object.
  2. Perfect radiator
    The radiator is made of cold-forged aluminum 1060 and is in perfect contact with the internal aluminum paste. It effectively transfers heat from the source to the cold-forged heat sink to reduce the junction temperature. When the temperature of the lamp body is lowered, the lamp is well protected.
  3. Important waterproof technology
    It is well known that if the illuminator is intended for outdoor use, a certain degree of water repellency must be obtained for safety reasons. Fortunately, our lamps are IP65 rated, with a waterproof rubber ring inside the lens and a waterproof connector at the exit of the lamps. The power supply unit has a protective cover with high water resistance. In addition, we have upgraded key components in the luminaire to support further insurance.
  4. CRI and CCT
    Our LED stadium floodlights has an excellent CRI >80, color temperature from 5000 to 7000K to choose from, stable DC output power supply, to ensure strobe rate <0.5%.
  5. Low glare level
    Too much glare can cause visual discomfort to the audience and athletes, which is not conducive to the game experience. Therefore, the lens is very important. A good lens can concentrate the light beam where it is needed and reduce the light leakage to 60%, thus alleviating the problem of light pollution to surrounding residents.
  6. After-sales warranty
    Although the LED light opportunity almost does not require a warranty, we still support a 5 years warranty or 7 years warranty, which is the sale responsible for the customers.

How to gain customized stadium&arena lighting solutions?

Some parameters of the projects need to be provided to us.

  • First, we need you to provide the layout of the gym or arena and the height of the flood pole. When the information is more detailed, we can provide you with a solution that will more satisfy you. Like this:
    Poles: N(pcs) * N(m)      Field Measure: N*N(m)       Fixtures: N (pcs)
  • Second, how many lux will you want to reach? Lux will determine the lighting effect of the entire football court. Our engineers will design according to the brightness required by the customer.
  • Third, What is your budget for this project? If there are requirements for led stadium lights the budget, our design will be adjusted accordingly.

After learning some information and requirements, the lighting scheme will be output as a DIALux file, which consists of pseudo-color rendering, contours and value charts.

dialux design

Some parameters need to be provided to us.

  • First, we need you to provide the layout of the stadium or arena and the height of the flood pole. When the information is more detailed, we can provide you with a solution that will more satisfy you. Like this:
    Poles: N(pcs) * N(m)      Field Measure: N*N(m)       Fixtures: N (pcs)
  • Second, how many lux will you want to reach? Lux will determine the lighting effect of the entire stadium. Our engineers will design according to the brightness required by the customer.
  • Third, What is your budget for this project? If there are requirements for the budget, our design will be adjusted accordingly.

After learning some information and requirements, the lighting scheme will be output as a DIALux file(for free), which consists of pseudo-color rendering, contours and value charts.

dialux design

Conclusion

Contact our experienced engineers to find out the stadium lights solution to optimize fixture output and energy consumption, according to the height and number of light poles, the site area, and lighting requirements. Welcome to the forefront of LED sport lighting and experience unprecedented efficient service.

Need free inquiry?

Scroll to Top