All in One Solar Street Lights
Intelligent power-saving mode all in one solar street lights activated by PIR motion sensor, professional water proof, protection grade IP66. The features are a unique integrated patented design, specially designed lens, wide beam angle, easy installation. Monocrystalline silicon solar panels, it is a high conversion rate German imported solar panels. Best led solar street fixtures the installation angle can be adjusted. MPPT intelligent controller, overheat protection, solar panel overcharge protection, and over-discharge protection. EMS automatically detects the charge and discharge capacity of the solar-powered street light battery.
All In One Solar LED Street light - Batman
- Light power: 20W-40W-70W-90W-120W
- Battery: 111WH-222WH-388.5WH-444WH-583WH
- Light efficiency: 120lm/w
- PIR inductor
- Warranty: 3-years
All In One LED Solar Barn Light - GK
- Light power: 10W
- Solar panel: 12W
- Battery:3.7V 20AH
- Light efficiency: 150lm/w
- Beam Angle: 160°
- Warranty: 2-years
All In One Solar LED Street Light - Knight
- Light power: 10W-20W-30W-40W
- Solar panel: 18W-30W-45W-55W
- Battery: 111WH-178WH-222WH-356WH
- Light efficiency: 150lm/w
- PIR inductor
- Warranty: 2-years
All In One Solar LED Garden Light - BST
- Light power: 16W
- Solar panel: 25W
- Battery: 138.8WH
- Light efficiency: 160lm/w
- PIR sensor
- Warranty: 3-years
All In One Solar LED Street Lights - Airship
- Light power: 30W-40W-60W-80W
- Solar panel: 40W-60W-70W-90W
- Battery: 222WH-388.5WH-444WH-583WH
- Light efficiency: 140lm/w
- PIR sensor
- Warranty: 3-years
Request a quote for all in one solar street light price list.
LED All in One Solar street lights: Definitive guide
What is unique about XSY integrated solar street lights?
- High-quality solar panels with neat lines, no color difference, no bubbles on the surface, and a conversion rate of 21%.
- Nichia Chips are versatile ultra high power LEDs multiple power levels and CRI options. They are designed for highly output lumen solar street light fixtures to lighting the address.
- The ternary lithium battery has a small volume, lightweight, higher energy density, low temperature resistance, better cycle performance, and more than 500-1000 times of charging design ( per charging time is 9-11 hours).
- The design is user-friendly, and the battery pack is at the rear end of the led light, which is easy to disassemble and maintain. We have added a waterproof iron case with double water-proof security to avoid its damage.
- Unparalleled MPPT and EMS, MPPT is the largest solar tracking technology that allows the solar panel to be pre-charged at a constant current. EMS is an energy management model that automatically detects the charge and discharge capacity of the solar panel, ensuring that the product can lit every day even for ten rainy days.
- PIR motion sensor, which effectively reduces the waste of illumination, provides 100% output brightness at night only when the object is perceived approach. You can also buy a remote control for testing the sensing effect.
- Bright fixture has a long lifespan because the solar panel has 10 years of life.
Why all in one solar street light led replace split led street solar light？
-
The components of solar led lights have always been nothing more than solar panels, batteries, controllers and LED modules.
-
The all in one solar led light integrates these components, and it only needs a few screws to complete the installation of the lamp on the pole.
-
Unlike the traditional split type has taken several hours to mount the panel bracket, the fixture holder and the battery compartment separately.
-
Traditional solar street lighting systems cost 40% to 60% more than integrated solar street fixtures.
The table below will help you understand the difference between them clearly.
| VS | Solar Split Light | All In One |
| Design | split | all in one |
| Cable | must need cable | no cables |
| Panel | assembly | integrated |
| Battery | in underground | in light fixture |
| Ip rated | IP65 | IP66 |
| Wind resistance | no | pass 16-grade strong windproof |
| Anti-rust | no | yes |
| Smart control | no | Build-in automatic inductor |
| Lifespan | 2-3 years | 6-8 years |
All in one solar streetlight design is easy to mount without cables wiring. The Li battery has 6-8 years of durability, while the built-in power supply can effectively prevent the solar panel from being stolen. It is rust-proof and has passed the IP66 waterproof rating and 16-level powerful windproof standard. Outdoor motion led solar light with built-in automatic sensors. This is definitely your best choice to cost less money.
The components of solar led light has always been nothing more than solar panels, batteries, controllers, and LED modules. The all in one solar led light for street lighting integrates these components, and it only needs a few screws to complete the installation of the lamp on the pole. Unlike the traditional split-type has taken several hours to mount the panel bracket, the fixture holder, and the solar panel compartment separately. Traditional solar street lighting systems cost 40% to 60% more than new ones.
All in one solar street lights are easy to mount without cables. The lithium battery has 6-8 years of durability, while the built-in power supply can effectively prevent the battery from being stolen. It is rust-proof and has passed the IP66 rating and 16-level powerful windproof. The fixture of XSY with built-in automatic sensors. This is definitely your best choice.
How to install all in one solar street light?
First, we should understand the working principle of the lower all in one solar led street lights: in the case of direct sunlight, the solar panel receives sunlight energy and converts it into electric energy, and then the electric energy charges the solar panel through the controller, and finally, the solar panel makes the product work. Therefore, when installing led solar streets light, in order to better receive the sun's energy, please try it to face the sun. (You can also contact us to ask, the professional team will advise you.)
In fact, the height of the poles will have corresponding requirements for different watt. You could read this table to determine how many watt solar led light you should use. There is a valuation form for reference.
| Light power | Pole-Height |
| 10-15 watts | 2-3.5m |
| 20-25 watts | 3-5m |
| 30-35 watts | 4-6m |
| 40-45 watts | 5-8m |
| 60 watts | 7-10m |
| 80 watts | 9-12m |
Mounting guide
-
Pole-mounting
There are two main types of poles-mounting brackets, one is a cylindrical one-piece bracket, which is convenient for directly inserting the poles. One is to use a U mounting bracket to facilitate the fixing of the street solar fixture to the pole, which supports adjust the lamp angle from 0-15 degrees. The mounting methods are shown below:
-
Wall-mounted
U-brackets and lamp bracket poles are available for wall mounting, and the BK and GK series are currently available for wall mounting.
The Solar wall light (GK) is designed for the USA, ideal for barn lighting and wall lighting, it and BST are also suitable for home, residential courtyard and trail lighting. Please contact us, we will provide you with the mounting instructions for the specific lamp, 24 hours online.
What certifications and reports does XSY all in one solar light have?
In addition to the quality of the materials and the strict control of the all in one solar powered street light product production process, certificated and test reports are the basis for the most reliable use of XSY products.
-
SAA, ROHS, CE-EMC, CE-LVD certificated we have
-
IP66 Report, Wind Load Resistance Performance Report, IES Report, UN38.8 Report
Why choose XSY solar street light?
For led street lighting, the reason for choosing it is that during the installation process, two workers generally need a simple wrench tool to complete the installation without using heavy equipment and tools. In this part, it can be omitted a lot of manpower and material resources. Moreover, the time for installation, construction and commissioning are eliminated, and its overall cost will also decrease. Usually, only one-fifth of traditionally led street products saving costs and are accepted by more people. It is also very simple when a solar street light is used for several years and needs to be replaced. As a company that has been established for 10 years, we have enough experience to provide customer with the best street solar lighting solution. Not only street lighting, but XSY all-in-one led street light solar also suitable for the parking lot, house garden, outdoor building wall, road, walkways, path, etc application.
Conclusion
We are a led manufacturer and supplier of all in one solar street lights with our own hardware processing plants, so we can offer our customers greater flexibility. Our experienced engineers will be glad to customized lighting projects for you. XSY is not only sale but service.
Need free inquiry?