LED LINEAR LIGHT - STRIP BATTEN LIGHT

2FT/4FT/8FT, from 15W to 68W
High efficacy 130lm/w
AC120-277/347V, Ra>80
Emergency backup and sensor optional
Easy installation,suspending mounting & surface mounted
Application：Industrial, Warehouse, Garages etc.
UL DLC SAA RoHS certificate

Parameter

Specification

Model	Size	Power	Efficacy	Lumen	Input voltage	Beam angle	CRI	CCT
X-LJZ(15/18/22/25)W-XXK	2FT	15W/18W/22W/25W	130LM/W	1950LM/2340LM/2860LM/3250LM	AC120-277V/347V	120°	>80	3000K 4000K 5000K 5700K
X-LJZ(30/36/40/50)W-XXK	4FT	30W/36W/40W/50W		3900LM/4680LM/5200LM/6500LM
X-LJZ(60/68/72/80)W-XXK	8FT	60W/68W/72W/80W		7800LM/8840LM/9360LM/10400LM

Contact

LED Linear Strip Lights

Led batten strip lights are easy to use, so you can use the kit in different locations where you can install led batten strip lights at home or in the office. Available in surface, wall and suspension mounting, the models are available in 2FT/4FT/8FT, 0-10V dimming, which is a perfect replacement for traditional strip lights.

Selectable by DIP switch on Driver 3 CCT(3500K/4000K/5000K) Selectablefor CCT Tunable model only

Size/Installation methods/Packing

LED Linear Strip Lights Size

2FT=0.6m(15W/18W/22W/25W)
4FT=1.2m(30W/36W/40W/50W)
8FT=2.4m(60W/68W/72W/80W)

LED Linear Strip Lights Installation Method 1

Remove the outlet cover with a tool.
Put the input line through the outlet cover plate, Then lock the outlet cover with a tool.
Drill three mounting holes in the wall for the retaining disc.
Screw the retaining disc to the wall.
Install the sling and hook onto the fixing plate.
Hang the lamp on the hook and connect the connecting hose to the junction box,
Connect the wires: AC/L match black; AC/N match white; PC/green match ground.

LED Linear Strip Lights Installation Method 2

Pull the part of the lampshade down by hand.
Untie the steel wire safety rope, Then untie the male female plug-in terminal and terminal.
First, drill holes with tools, and then fix the expansion pipe to the ceiling.
Pry off the knock-out hole on the bottom shell with a tool, Secure the threading hose bottom shell.
Fix the bottom shell to the wall with tools.
Hook the lamp cover with safety wire rope and plug in the plug-in terminal and ground terminal;
Connect the wires: AC/L match Black;AC/N match White; PC/Green match ground
Press the lamp cover part in, fix it completely.